Mar 29, 2020 #1 Indy Industrial Joined Dec 14, 2012 Messages 172 Location GB Hi, Does anyone know if Techlok and Graylok Hubs are the same piece piece of equipment albeit from a different manufacturer? are they interchangeable if they are the same size, can one style be used to replace the other? Thanks
Hi, Does anyone know if Techlok and Graylok Hubs are the same piece piece of equipment albeit from a different manufacturer? are they interchangeable if they are the same size, can one style be used to replace the other? Thanks
Mar 29, 2020 #2 JohnRBaker Mechanical Joined Jun 1, 2006 Messages 38,277 Location US There was a thread covering some of these issues back a few years: https://www.eng-tips.com/viewthread.cfm?qid=415058 John R. Baker, P.E. (ret) EX-Product 'Evangelist' Irvine, CA Siemens PLM: UG/NX Museum: The secret of life is not finding someone to live with It's finding someone you can't live without Upvote 0 Downvote
There was a thread covering some of these issues back a few years: https://www.eng-tips.com/viewthread.cfm?qid=415058 John R. Baker, P.E. (ret) EX-Product 'Evangelist' Irvine, CA Siemens PLM: UG/NX Museum: The secret of life is not finding someone to live with It's finding someone you can't live without
Mar 29, 2020 Thread starter #3 Indy Industrial Joined Dec 14, 2012 Messages 172 Location GB Thanks for this. Upvote 0 Downvote
Mar 29, 2020 #4 LittleInch Petroleum Joined Mar 27, 2013 Messages 23,097 Location GB Only as a pair. The previous post still applies AFAIK. In reality the two may work but as they are not made to an official standard then there may be subtle differences which cause it not to work properly. Unless you can get this in writing from the vendors then you're out on a limb. I couldn't find anything which says you can use them interchangeably. Let us know what you find. [pre][/pre] Remember - More details = better answers Also: If you get a response it's polite to respond to it. Upvote 0 Downvote
Only as a pair. The previous post still applies AFAIK. In reality the two may work but as they are not made to an official standard then there may be subtle differences which cause it not to work properly. Unless you can get this in writing from the vendors then you're out on a limb. I couldn't find anything which says you can use them interchangeably. Let us know what you find. [pre][/pre] Remember - More details = better answers Also: If you get a response it's polite to respond to it.
Mar 29, 2020 Thread starter #5 Indy Industrial Joined Dec 14, 2012 Messages 172 Location GB Will do. Thanks again. Upvote 0 Downvote