Taylor Forge catalogue #571 1

[orincarman]

I need dimensions on 26" 600# raised face flanges that were built in accordance with the flange dimensions on pages 76 and 77 of the Taylor Forge catalogue #571.

orin.carman@alonusa.com

 

[codeeng]

I don't have the TF catalogue but its very possible that this flange is part of ASME 16.47 series A or B (formally MSS and API 605). Here's one of many links available:

http://www.iimage.com.au/camaneng.com.au/flanges.php

 

[gasketguru]

I have an old copy of the Taylor Forge catalogue, and can confirm that these two pages show sizes that are now essentially the ASME B 16.47 series A (MSS-SP44) rather than the series B (API 605) ones.

 

[unclesyd]

Here are the dimensions for your flange as per 16.47 A.
Not shown is the weld bevel that is normally 37.5° with a 1/16" land.

http://www.lyncoflange.com/public/fl_08.htm