Jan 4, 2008 #1 TheMan51 Automotive Joined Feb 8, 2007 Messages 109 Location US I would like to know the best way to depict a tapered pipe thread on a 2-D drawing. The thread size is 1/2"-14. Thanks in advance
I would like to know the best way to depict a tapered pipe thread on a 2-D drawing. The thread size is 1/2"-14. Thanks in advance
Jan 4, 2008 #2 ctopher Mechanical Joined Jan 9, 2003 Messages 17,519 Location USA, CA Check the Machinery Handbook. http://www.knovel.com/knovel2/Toc.j...romSearch=true&ShowHitsOnly=true&InBook=false Chris SolidWorks/PDMWorks 08 1.1 AutoCAD 06 ctopher's home (updated 10-07-07) ctopher's blog Upvote 0 Downvote
Check the Machinery Handbook. http://www.knovel.com/knovel2/Toc.j...romSearch=true&ShowHitsOnly=true&InBook=false Chris SolidWorks/PDMWorks 08 1.1 AutoCAD 06 ctopher's home (updated 10-07-07) ctopher's blog
Jan 4, 2008 Thread starter #3 TheMan51 Automotive Joined Feb 8, 2007 Messages 109 Location US Thanks for the response ctopher. However when I attempt to open the link it does not work. Upvote 0 Downvote
Jan 4, 2008 #4 CorBlimeyLimey Mechanical Joined Nov 5, 2003 Messages 15,292 Location CA http://images.google.ca/imgres?imgu...36&gbv=2&ndsp=18&svnum=10&hl=en&safe=off&sa=N Upvote 0 Downvote
Jan 8, 2008 Thread starter #5 TheMan51 Automotive Joined Feb 8, 2007 Messages 109 Location US Thanks much CorBlimeyLimey. And thanks also to all that replied. Upvote 0 Downvote