Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tabular Loads, Function Loads

Status
Not open for further replies.
eng426

eng426

Mechanical
Jun 27, 2003
25
I just purchased ANSYS Professional and was wondering if anyone has ever used "Tabular Loads" on a model and how it went. I am planning on getting a pressure profile from my CFD engineer and applying these loads to my model to stress analyze it. It would be interesting to know if anyone else has done this before and what problems they may have faced.
Also I am unfamiliar with "Function Loads". How have you used it?
All responses greatly appreciated!

Vince
 
Status
Not open for further replies.

Similar threads

Faraz1997
  • Locked
  • Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
848
NRP99
NRP99
X
  • Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
948
xinyu3liu
X
RMANERA
  • Locked
  • Question
Performing nonlinear analysis by Ansys APDL with the application of two loads simultaneously
Replies
4
Views
600
RMANERA
RMANERA
chris456s
  • Locked
  • Question
Blast Loads
Replies
0
Views
113
chris456s
chris456s
aliex
  • Locked
  • Question
Define heat transfer coefficient as function
Replies
5
Views
256
aliex
aliex

Part and Inventory Search

Sponsor

Back
Top Bottom