Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tables in format deleting improperly

Status
Not open for further replies.

fraga425

Mechanical
Joined
Aug 10, 2012
Messages
2
Location
US
Hi!

I am creating updated drawing formats. I too the old fomat, deleted the tables, saved a copy, and inserted new tables (that were for a file). the format file looks great but when I open a drawing using the format the old tables reapear on top of the new tables...

I tried restarting Pro/E and opening a drawing that does not referance any part but the old table still apear.

Any Idea how to fix this problem?

Thanks!
 
Are you dealing with a drawing template along with a drawing format?


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
 
Template tables get copied into the drawing when the template is loaded. You always have to delete the old tables when you change formats.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top