Tables in drafting.

[cobaltred]

When I insert a table to be used to make a custom title bar I would like to know how I can move the table using snaps so
that I can snap to the border in the lowwer right corner instead of just moving it in place by eye close to where I want it to be.
Any suggestions welcome, maybe it is something small I am overlooking.Move cannot snap the move icon to to endpoints of the table in order to move it accuratly

Thanks nx8

B.

 

[JohnRBaker]

I used grid points when I created my Drawing board templates. If you pick the right grid spacing and place the border artwork correctly you should be able line things up that way.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[jerry1423]

rmc (right mouse click) on the top left of the table
pick Origin from the menu
pick the top-right icon (point constructor) in the Origin Tool menu, but first toggle associative if that's want you want
In the Origin Location pull-down menu, pick what you want