Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Table row limit? 2

Status
Not open for further replies.

Rich944

Mechanical
Joined
Feb 8, 2007
Messages
68
Location
GB
Hi all,

I have a table I am creating in drafting. After creating 32 rows when I choose insert row below it wont let me. I get a row starting from the top of the table to the side of the top row.
Is this normal? How can I create a row below?

NX7.5

Cheers,
Rich
 
Right click -> Style
In the Sections tab, Change Maximum Height value to some large number like 50 or 100.
 
djkatt/man2007,

I think you may need to increase the Maximum Height further? I believe the value specified is in 'units of measure' (i.e. mm or inch) and not 'number of rows'. So take the number of rows you table needs and multiply that by the row-height to get the figure you need for Maximum Height (of the Table).

Cheers!
NXherbie
(NX7.5 & TCe 2007)
 
Many thanks, nice and easy when you know how!

Rich
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top