Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
T-Peel Test
- Thread starter clint05
- Start date
- Thread starter
- #2
Hello to everyone!
I'm running a project wich includes a series of t-peel tests and i have to do a simulation of the t-peel test method using Ansys.
Has anyone any idea how to program this in Ansys?
Thank you in advance!
In the attached picture you can see the geometry of the problem.
In the left aluminium part there's a fixed support and on the right one an axial force.
In the middle stands an adhesive material.
I'm running a project wich includes a series of t-peel tests and i have to do a simulation of the t-peel test method using Ansys.
Has anyone any idea how to program this in Ansys?
Thank you in advance!
In the attached picture you can see the geometry of the problem.
In the left aluminium part there's a fixed support and on the right one an axial force.
In the middle stands an adhesive material.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question
