pumpmanagement
Mechanical
How do I determine the size of syphon breaker pipe required on an axial flow pump to ensure it functions correctly
Regards
Brian Conway
Regards
Brian Conway
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Syphon Breaker 2
- Thread starter pumpmanagement
- Start date
- Status
-
1
- #2
thewellguy
Electrical
You needs to provide more info. E.G. gpm and pipe size
-
1
- #3
By function correctly do you mean in both steady and unsteady state conditions? If so you should use a surge analysis program like AFT's Impulse where you can model the performance of an air release/vacuum breaker type valve.
The are four applicable equations. Two for in flow and two for out flow. the equation changes depending if the flow is critial or not.
The are four applicable equations. Two for in flow and two for out flow. the equation changes depending if the flow is critial or not.
- Status
