I am experiencing problems with mirrored assemblies in my models. The mirrored assemblies seem to loose their relationship to the model and sometimes the complete mirrored assembly or parts of it move to random positions in space. I find that the only way to fix this is to delete the mirrored assembly and redo it. Does anyone have any ideas on how to fix this.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
symmetry of assemblies
- Thread starter friesen99
- Start date
Hi,
you can try this method,
once you complete mirroring the parts or a subassembly,
Creat new product in the main assembly and copy all the symmetry parts into it, and delete the mirrored one. This will loose the positional link with the original parts but it will have the geometrical link. And you will not have any of those problems.
I think this will help you
Ravi
you can try this method,
once you complete mirroring the parts or a subassembly,
Creat new product in the main assembly and copy all the symmetry parts into it, and delete the mirrored one. This will loose the positional link with the original parts but it will have the geometrical link. And you will not have any of those problems.
I think this will help you
Ravi
- Status
Similar threads
