Symbols 2

[rajant2001]

I require Standard (NEMA etc.)symbols (which can be used by copy and paste method) for prepation of elecrical circuits/Wiring diagrams, control schemes and logic diagrams.

Can any of you help me.

Thanks in anticipation

R.Thiyagarajan.

 

[DonPhillips]

http://www.google.com

Don Phillips

http://worthingtonengineering.com

 

[chicopee]

If you have ACAD from 2000 version up to the latest version, take a look at your design center, you should have a folder strictly on electrical symbols.

 

[LHA]

US National CADD Standard has some, for each discipline. Freeware.

Home page is here:

https://tsc.wes.army.mil/

You need to download TSWS - TriService Workspace. It is in a Zip file. I think they will be included with that, but if not, there are block files somewhere on that site.

These are depicted in Ch 5 of the User's Manual.

Engineering is the practice of the art of science - Steve

 

[rajant2001]

Dear Mr. LHA,
Thank you for your reply. However the refferred home page "

https://tsc.wes.army.mil/"

is blocked and able to open. If you are having a copy, kindly post the same.
Regards,
R.Thiyagarajan.

 

[LHA]

I just got into

https://tsc.wes.army.mil/

fine.

Try going straight to the CADD center:

https://tsc.wes.army.mil/center_info/

Or the Donwload Center:

https://tsc.wes.army.mil/products/

Engineering is the practice of the art of science - Steve

 

[borgunit]

Hers a couple more...

http://www.cben.net/

http://www.automation.siemens.com/sitop/html_76/library.htm

"Everybody is ignorant, only on different subjects." — Will Rogers