Apr 17, 2013 #1 Geocito Civil/Environmental Joined Dec 14, 2007 Messages 9 Location ES I've added some coordinate/grid systems to a model I'm working on. I need them to define a complex geometry (holes in shells). However, the GLOBAL system is always displayed. How can I choose the coordinate/grid system I want to use? Thanks
I've added some coordinate/grid systems to a model I'm working on. I need them to define a complex geometry (holes in shells). However, the GLOBAL system is always displayed. How can I choose the coordinate/grid system I want to use? Thanks
Apr 17, 2013 #2 WillisV Structural Joined Apr 24, 2005 Messages 1,352 Location US Button in bottom right that says "Global" - click on it... Upvote 0 Downvote
May 6, 2013 Thread starter #3 Geocito Civil/Environmental Joined Dec 14, 2007 Messages 9 Location ES Thank you. Very simple, but I had never noticed and couldn't find any reference to this in the manual. Upvote 0 Downvote
Thank you. Very simple, but I had never noticed and couldn't find any reference to this in the manual.