SW2008 rev block 1

[hotiron]

Hi all,
Can insert row below in revision table, but cannot delete row? Any thoughts?

 

[CorBlimeyLimey]

From the SW Knowledge Base;
------------------------------------------------------
SPR# = 406105

Description = Issue with deleting column and row from revision table

Status = Open
------------------------------------------------------

 

[CorBlimeyLimey]

The delete function appears to be working OK for me with SW08-SP4.

Is the RMB delete option not available, or does it just not work?

 

[hotiron]

CBL
Just doesnt work. We are at sp3 however. Maybe sp4 fixes the issue?

 

[CorBlimeyLimey]

Maybe ... but there is no guarantee! Every system is slightly different. What works for one may not work for another.

 

[fcsuper]

If there is a need to delete a row and the function isn't working right via the normal method, it still may work with the API in a macro.

Matt Lorono
CAD Engineer/ECN Analyst
Silicon Valley, CA
Lorono's SolidWorks Resources
Co-moderator of Solidworks Yahoo! Group
and Mechnical.Engineering Yahoo! Group

 

[hotiron]

CBL
Seems as though such a function should always work everywhere. I mean to delete a row in a table isnt what I'd call complex, I beleive. I will see what happens with an sp4 install.
fcs
Do you have such a macro?
Thanks

 

[fcsuper]

I have a macro that shows you how to add a row. Deleting uses the same type of functionality, and the API help does cover this well enough to figure it.

http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdownloaddetails&lid=65

Matt Lorono
CAD Engineer/ECN Analyst
Silicon Valley, CA
Lorono's SolidWorks Resources
Co-moderator of Solidworks Yahoo! Group
and Mechnical.Engineering Yahoo! Group

 

[GRF]

I found that you have to click on the table then select the blank box that appears to the left of the revision field. This will select the entire row then the delete function will work. I have to do the same type of thing to delete a column as well.

 

[fcsuper]

Someone is making some weird discussions in the software dept over there at SW. Did anyone put in an ER to limit this functionality?

Matt Lorono
CAD Engineer/ECN Analyst
Silicon Valley, CA
Lorono's SolidWorks Resources
Co-moderator of Solidworks Yahoo! Group
and Mechnical.Engineering Yahoo! Group

 

[hotiron]

Thanks GRF
Same function from different start.

 

[ctopher]

I have SP3.1, it works for me. As GRF mentioned, select the left side of the row, right-click, delete or insert row.

Chris
SolidWorks/PDMWorks 08 3.1
AutoCAD 06/08
ctopher's home (updated Jul 13, 2008)

 

[ctopher]

Just in case, here is a video to show it working...
(attached)

Chris
SolidWorks/PDMWorks 08 3.1
AutoCAD 06/08
ctopher's home (updated Jul 13, 2008)