Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SW-Sim Newbie

Status
Not open for further replies.
voodoo333

voodoo333

Mechanical
Joined
Jul 22, 2009
Messages
4
Location
GB
I have a little experience on basic static FEA in ProMechanica. I know about material failure and its results in the FEA package. I am trying to learn FEA in Solidworks.

I know you are here for help but I dont want to post every little query and problem that I have.

I am going thru the SW-Sim tutorials. I notice there is nothing available online.

Can you guys direct me to somewhere that I can learn the package and understand the results.

Cheers
 
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Flow simulation evaporative cooling
Replies
0
Views
912
arimaulanar
A
IdanPV
  • Locked
  • Question Question
Apply Moments in Solidworks Simulation
Replies
2
Views
2K
IdanPV
IdanPV
Joel_Lapointe
  • Locked
  • Question Question
Cylindrical coordinate system shear stresses for SolidWorks Simulation?
Replies
0
Views
1K
Joel_Lapointe
Joel_Lapointe
Joel_Lapointe
  • Locked
  • Question Question
Impose mesh coordinates multiple different simulations (SolidWorks Simulation)
Replies
2
Views
1K
Joel_Lapointe
Joel_Lapointe
lpresciuttini
  • Locked
  • Question Question
Pressure Vessel Linearization (Simulation): Invalid points
Replies
1
Views
1K
IdanPV
IdanPV

Part and Inventory Search

Sponsor

Back
Top