Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SW 2005 SP 4.0 Released 1

Status
Not open for further replies.
Why is it EV? Isn't that short for evaluation or something?

Flores
 
It doesn't show 4.0 as released. 3.1 is the latest

Macduff [spin]
Colin Fitzpatrick
Sr. Mechanical Designer
macduff's SW page
Inhouse System
Pentium(4)2.80GHz
Ram 1.00 GB
SW2005 Office SP 3.1
Windows 2000 SP4.0
NIVIDA Quadro4 750 XGL

 
Yes. But the download should be the full SP release. (There must have been a 4.0EV release as well, so there is an option for upgrading from that SP as well as the previous SPs.)


Jeff Mowry
Reality is no respecter of good intentions.
 
Whoops--started typing before macduff's post was visible.

I didn't see SP 4.0 listed in the SPR fix list page, but the SP I downloaded was 4.0 and not 4.0EV.


Jeff Mowry
Reality is no respecter of good intentions.
 
What new in SP4.0?

thx

Industrial Designer
SW2005 SP3.1
 
Not sure yet. Still working on a project, so I've neither installed it nor seen the release notes. For what it's worth, what's new isn't supposed to be disclosed publicly, so we'll need to wait for the relase notes to be published or to install to find out.


Jeff Mowry
Reality is no respecter of good intentions.
 
SP 4.0 is released as of yesterday. I wonder why I didn't see it when this thread was posted?

Anyone running it yet?

Macduff [spin]
Colin Fitzpatrick
Sr. Mechanical Designer
macduff's SW page
Inhouse System
Pentium(4)2.80GHz
Ram 1.00 GB
SW2005 Office SP 3.1
Windows 2000 SP4.0
NIVIDA Quadro4 750 XGL

 
There are quite a few fixes in the latest SP. I have read through a few of them but don't really have time to read all of them. This is one of the bigger SP releases I have seen so far.

One noteable feature I found with this SP is that the measure tool now has a pink selection box, which enables you to see what items you have selected.

Best Regards,
Jon

Challenges are what makes life interesting; overcoming them is what makes life meaningful.

Solidworks 2005 SP3.1
 
Cool. I'll need to put this project to bed and install the SP. You'll need to update your sig line.


Jeff Mowry
Reality is no respecter of good intentions.
 
Anyone running SP4.0 yet? Any known bugs? I'm running it and everything seems to be A OK.

Macduff [spin]
Colin Fitzpatrick
Sr. Mechanical Designer
macduff's SW page
Inhouse System
Pentium(4)2.80GHz
Ram 1.00 GB
SW2005 Office SP 3.1
Windows 2000 SP4.0
NIVIDA Quadro4 750 XGL

 
...I'm also running it with no problems.

Brian
 
So far so good......
 
This has got to be one of the biggest SP's in some time, I counted over 300 fixes.

"The squeaky wheel gets greased"

Flores
 
SP4.0 seams stable to me......

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 4.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NIVIDA Quadro FX 1400
o
_`\(,_
(_)/ (_)

"There is no trouble so great or grave that cannot be much diminished by a nice cup of tea" Bernard-Paul Heroux

 
another question...........
any you guys using sp 4.0 with solidworks and pdmworks vault? Is it stable too?

Macduff [spin]
Colin Fitzpatrick
Sr. Mechanical Designer
macduff's SW page
Inhouse System
Pentium(4)2.80GHz
Ram 1.00 GB
SW2005 Office SP 3.1
Windows 2000 SP4.0
NIVIDA Quadro4 750 XGL

 
yes we are using the 4.0 SP with the PDM Works vault and it is much more stable for us.

Best Regards,
Jon

Challenges are what makes life interesting; overcoming them is what makes life meaningful.

Solidworks 2005 SP3.1
 
Macduff,
We are using SolidWorks 2005 SP4 with PDM Works 0.0
It has been stable for us, although I do crash every now and then.


Bradley
 
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question
SW dwg radius/diameter dimensions...... 1
Replies
11
Views
1K
CAD2015
CAD2015
33MRM33
  • Locked
  • Question
SW Macro to list hole wizard features and measures the diamter of modeled hole
Replies
4
Views
2K
Gupta65
Gupta65
joshF
  • Locked
  • Question
Improve my macro for sorting a SW Bill of material so Sub-assemblies come first.
Replies
1
Views
1K
ROHITKN
ROHITKN
CAD2015
  • Locked
  • Question
"Normal To" option on the SW screen...... 1
Replies
12
Views
881
CAD2015
CAD2015
Nobert_47
  • Locked
  • Question
SW is autogenerating templates 1
Replies
11
Views
624
SBaugh
SBaugh

Part and Inventory Search

Sponsor

Back
Top Bottom