Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

surface finish question 1

Status
Not open for further replies.
caseynick

caseynick

Mechanical
Joined
Sep 22, 2005
Messages
36
Location
US
Is the "cutoff length" the same as the length the stylus of a profilometer travels? I am pretty certain they are not the same, but have been told they are.
 
Sort by date Sort by votes
No. The cutoff length is the length over which the trace is evaluated. Generally the length of trace is made up of 6 cutoff lengths. Example: length of trace 1.5mm would have a cutoff length of .25mm. The cutoff length is generally selected based on the periodicity of the surface finish.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Tmoose
  • Locked
  • Question Question
gross surface finish quantification
Replies
8
Views
651
MintJulep
M
Qcprick63
  • Locked
  • Question Question
surface finish?
Replies
3
Views
366
Qcprick63
Qcprick63
ASIT859
  • Locked
  • Question Question
FARO Cam2 - Straight Slot Surface Datum A, Flat Surface Datum B Inspection?
Replies
0
Views
871
ASIT859
ASIT859
Qcprick63
  • Locked
  • Question Question
GD&T Question
Replies
3
Views
343
Qcprick63
Qcprick63
SMKRe
  • Locked
  • Question Question
Object's surface temperature from the emissivity (temperature known for various emissivites)
Replies
2
Views
415
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top