dalegoldston
Mechanical
Is there a web site with visual aids for metal surface finish? Or better yet is a 63 finish on 303 stainless possible with endmills?
Thanks
Dale
Thanks
Dale
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Surface Finish on Stainless 1
- Thread starter dalegoldston
- Start date
- Status
McMaster-Carr website has surface finish scales for about $60USD.
[green]"I think there is a world market for maybe five computers."[/green]
Thomas Watson, chairman of IBM, 1943.
Have you read faq731-376 to make the best use of Eng-Tips Forums?
[green]"I think there is a world market for maybe five computers."[/green]
Thomas Watson, chairman of IBM, 1943.
Have you read faq731-376 to make the best use of Eng-Tips Forums?
-
1
- #3
2B or not 2B. That is the question.
Wether 'tis nobler in design to suffer the slings and arrows of outrageous mill finish, or to take up tools against a sea of non-conformances, and by buffing end them? To grind; to polish; no more; and by polishing to say we end the heartache and the thousand natural shocks that manufacturing is heir to.
Wether 'tis nobler in design to suffer the slings and arrows of outrageous mill finish, or to take up tools against a sea of non-conformances, and by buffing end them? To grind; to polish; no more; and by polishing to say we end the heartache and the thousand natural shocks that manufacturing is heir to.
- Status
Similar threads
- Question
