Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Surface finish of Aluminum

Status
Not open for further replies.
Steved

Steved

Industrial
Joined
Aug 25, 1999
Messages
32
Location
US
Hello:
How are you? I was wondering if anybody is aware of the change in surface finish (Ra and Rz) to an aluminum surface after anodizing? Prior to anodizing, the surface finish will be submicron - will it change after anodizing?

Thank you,
Steve
 
Status
Not open for further replies.

Similar threads

T
  • Locked
  • Question Question
Calculate required amount of paint for mechanical spring
Replies
5
Views
3K
Compositepro
Compositepro
ipi
  • Locked
  • Question Question
Uninsulated portions of insulated piping
Replies
1
Views
942
Andrew ONeill
Andrew ONeill
dogbural
  • Locked
  • Question Question
polyurethane foam stuck on painted surface
Replies
6
Views
1K
dogbural
dogbural
Best Nitriding
  • Locked
  • Question Question
Surface cracking after liquid nitriding in 16MnCr5 Material
Replies
0
Views
819
Best Nitriding
Best Nitriding
mectarek
  • Locked
  • Question Question
surface roughness and cleaness
Replies
2
Views
440
david339933
david339933

Part and Inventory Search

Sponsor

Back
Top