Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Suppress edges in Abaqus

Status
Not open for further replies.
mj345

mj345

Mechanical
Joined
Jan 9, 2019
Messages
82
Location
US
Hello all,
Good morning. Thanks for all your time.
May I know any option available in Abaqus to suppress edges so that they are not participate in meshing.
Any help is greatly appreciated.

Thanks,
 
Last edited:
Sort by date Sort by votes
You can use Virtual Topology: Ignore Entities but it doesn’t work on all edges - only those shared by two faces or embedded within a face.
 
Upvote 0 Downvote
FEA way said:
You can use Virtual Topology: Ignore Entities but it doesn’t work on all edges - only those shared by two faces or embedded within a face.
Click to expand...
Yaa you are correct. Its not working on some edges. Thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
A
  • Solved
Applying Local Coordinate System for BC in Abaqus
Replies
1
Views
4K
FEA way
FEA way
jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
760
FEA way
FEA way
mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
401
mj345
mj345
Shahrukh_Islam
  • Question Question
What does Convergence Tolerances mean in Abaqus?
Replies
1
Views
9K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top