Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

supplier for high temperature asphaltic coating

Status
Not open for further replies.

engtips376

New member
Joined
Jul 22, 2005
Messages
6
Location
IN
could any one help me to find supplier for high temperature (260 degree C) asphalt coating.

our application is to revamp Primary Reformer.

appricate any help/ suggestion
 
any country in the middle east
 
DaveMinter

if no supplier is available in middle east please advice supplier in any country

thank you for your advance help
 
engtips376 I'm afraid I don't know enough to help you. The only high temperature asphalt I've dealt with was for bituminous pavements. A little more detail might be helpful for myself and others though.

Isn't a Primary Reformer part of a nitrogenous fertiliser production process? I thought they run hotter than 260 degrees (over 800 degrees)?
 
I would give these people as they have the materials to cover a wide range insulation. We used some of their materials in fairly high temp service.


On other possibility is the coatings used on the beds and frames of pickups. I recently saw pickup that had burned and part of the bed coating still looked good.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top