Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sump Pumps for Basements

Status
Not open for further replies.
D28

D28

Civil/Environmental
Dec 15, 2006
4
Where is the sump pump detail and callout for a single family residence typically found? Architectural Plans, Foundation Plans, Grading Plans, Drainage Plans? Other?


Thanks in advance!

 
Replies continue below

Recommended for you

Sort by date Sort by votes
how about plumbing plan?
 
Upvote 0 Downvote
Just a little clarification, the sump pump is required to connect to the subdrain for the basement and has no wastewater only groundwater or stormwater, what ever collects in the backdrains for the walls of the foundation.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

meatymatt
  • Question
Do you consider "breakout" when designing infiltrators for roof runoff?
Replies
1
Views
3K
swazimatt
swazimatt
backseatpockets
  • Locked
  • Question
Runoff coefficients for sloped regions and hydraulic soil groups
Replies
2
Views
4K
backseatpockets
backseatpockets
Dersnerman
  • Locked
  • Question
Help with Design Resources for Small Overflow Weir Design - Hydropower & Microhydropower
Replies
3
Views
9K
gbam
gbam
meatymatt
  • Locked
  • Question
4" Loamy Sand over 6'+- Sandy Clay Loam - What rate should you use for drawdown?
Replies
2
Views
10K
swazimatt
swazimatt
Structer01
  • Locked
  • Question
Another name for a Yard Inlet
Replies
7
Views
7K
swazimatt
swazimatt

Part and Inventory Search

Sponsor

Back
Top Bottom