Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sulfuric Acid Tanks 70-100%

Status
Not open for further replies.
Freddy1234

Freddy1234

Civil/Environmental
Joined
Nov 7, 2012
Messages
1
Location
CA
Looking to install new sulfuric acid tank to replace the existing Ferrichem 30 tank we now have in services. The ferrichem requires s.s. or FRP. We would kike to install a FRP tank for the Sulfuric just encase we every have to go back to Ferrichem in the future. Is FRP ok for Sulfuric Acid 70%-90%
 
Sort by date Sort by votes
70% sulphuric aci is an upper threshold for FRP, so this isn't the way to go.
 
Upvote 0 Downvote
You can find many info consulting NACE Standard SP0294-2006 and NACE Standard RP0294-94
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Boiler1
  • Question Question
Acid scrubber 'spitting' issue
Replies
4
Views
4K
georgeverghese
georgeverghese
H
  • Question Question
Cooling mixing tanks with a chiller, selecting chiller size
2
Replies
23
Views
14K
georgeverghese
georgeverghese
kootheBUNNY
  • Locked
  • Question Question
Weak sulfuric acid
Replies
9
Views
672
pierreick
pierreick
mjpetrag
  • Locked
  • Question Question
Sulfuric acid injection for Cooling Water pH control
Replies
8
Views
1K
georgeverghese
georgeverghese
andy_oohhh
  • Locked
  • Question Question
Atmospheric Tanks Design Pressure (45/FV?)
Replies
13
Views
1K
0707
0707

Part and Inventory Search

Sponsor

Back
Top