Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Suitable GC for Hydrocarbons
- Thread starter oswald88
- Start date
georgeverghese
Chemical
While I dont have suitable manufacturers to recommend, pls also note that for a GC to work well, I'd say 80% of the required engineering work is in the gas sampling and preconditioning kit, and 20% is in the vendor supplied GC. If not all, most GCs' dont work because gas preconditioning is not adequate.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question