Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Suitable Adhesive For Granite to Stainless Firebox?

Status
Not open for further replies.

mikeo56

Structural
Jun 3, 2003
28
I am looking for an adhesive that is suitable for attaching 3/8" thick granite to the face of a stainless fireplace.
 
Replies continue below

Recommended for you

RTV Silicone would probably be your best choice. Apply it in spots about 1/8" thick by 1" in diameter. You can use two sided pressure sensitive tape (like 3M VHB) to fixture things in place until the silicone cures enough (at least 24 hours).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor