Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Suggested Video

Status
Not open for further replies.

BigH

Geotechnical
Joined
Dec 1, 2002
Messages
6,012
Location
TJ
I've been able to view a number of geotechnical videos and would urge any interested in grouting to see the Don Bruce's Terzaghi lecture (2015).
 
SRE...you beat me to it! I tried from my tablet but didn't work....probably my lack of tablet capability!!
It's a good lecture.
 
Ron - Yes, I wanted to see this video and watched it over the weekend. We had Hayward Baker do quite a bit of grouting at one of our coal-fired station sites in the early 1980's. I was surprised when Dr. Bruce mentioned the first use of a Hydromill in the U.S. (1983). This was on an unrelated Corps on Engineers project (St. Stephen Dam, image shown below) located on our hydroelectric reservoir:

URL]


[idea]
[r2d2]
 
SRE....yes, the video is good. It was popular in the 80's to fill subsurface voids in Central Florida by grouting. That has waned over the years because of expense and the unknown quantities required to fill some of our "never ending" voids!
 
Great to see that the Tube includes some geotechnical vids, I even saw that there are Buchanan lectures on the vid list.

 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Sponsor

Back
Top