Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sub-assemblies from other models

Status
Not open for further replies.
3JC

3JC

Mechanical
Joined
Jul 12, 2010
Messages
98
Location
PE
Dear collages:

I'm involved in this moment in a parametric study. But I want to know if it would be possible to import a model into a new model (what I want to do is to import different geometries of bolts). Thank you very much. Best regards,

jJ
 
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Cohesive Elements compressive limit to keep bodies affecting it from reaching each other
Replies
1
Views
2K
FEA way
FEA way
omega_heiki
  • Locked
  • Question Question
Submodeling from pie-slice with symmetric BC
Replies
4
Views
1K
omega_heiki
omega_heiki
Oluwakay
  • Locked
  • Question Question
error message from abaqus.
Replies
3
Views
2K
FEA way
FEA way
mj345
  • Locked
  • Question Question
Select edges from a selected cell
Replies
1
Views
2K
FEA way
FEA way
DualXeonSpaceHeater
  • Locked
  • Helpful tip Helpful tip
Resolving "SECTION CONTROL NAMES MUST BE UNIQUE" error when transferring b/w Abaqus models
Replies
0
Views
997
DualXeonSpaceHeater
DualXeonSpaceHeater

Part and Inventory Search

Sponsor

Back
Top