Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

sturcture (columns & beams) doesn't run

Status
Not open for further replies.
utamiria

utamiria

Civil/Environmental
Joined
Nov 13, 2015
Messages
1
Location
ID
when i run the cases why my model not run well? deformed just on the slab, so when i run the cases, my slab reaction are up and down, but my columns and beams don't have reaction.
 
Sort by date Sort by votes
Check your model carefully. It seems that you might have, erroneously, assigned 'supports' to top joints of columns and edge joints of slab, instead of base level joints.

A good structural engineer is often a blessing for others.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Mina Kromer
  • Locked
  • Question Question
Rigid and Semi-rigid diaphragm in ETABS - Slab with beams
Replies
6
Views
2K
STpipe
STpipe
InnovatorX
  • Locked
  • Question Question
ETABS API Pier and Spandrel Forces ETABSv1.dll ETABS 21 & 22
Replies
2
Views
2K
InnovatorX
InnovatorX
YellowYoshi
  • Locked
  • Question Question
ETABS, Computer crashes when entering 3D view with DirectX graphics and plan view zoom doesn't work
Replies
1
Views
751
JoshPlumSE
JoshPlumSE
F.Moghadam
  • Locked
  • Question Question
How to model 2 end beams connected to columns with a middle beam (ETABS API)
Replies
0
Views
217
F.Moghadam
F.Moghadam
NicoArq
  • Locked
  • Question Question
ETABS - ACI 318-19 Generation of Biaxial Interaction Surfaces of Concrete Columns Question
Replies
0
Views
384
NicoArq
NicoArq

Part and Inventory Search

Sponsor

Back
Top