Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Strut and Tie Modelling Methods

Status
Not open for further replies.
Reo-Checka

Reo-Checka

Structural
Joined
Feb 5, 2021
Messages
5
Location
AU
What methods do you use for designing non-flexural elements with strut and tie modelling? It seems like there are a variety of approaches involving a mixture of hand calcs, spreadsheets and software used by Australian structural engineers and I'm interested in the pros and cons of each.

ReoChecka
 
Status
Not open for further replies.

Similar threads

silver2164
  • Locked
  • Question Question
Pile cap strut and tie - strut dimension and bursting reinforcement
Replies
5
Views
2K
rapt
rapt
bugbus
  • Locked
  • Question Question
Strut & tie code issues
Replies
7
Views
811
bugbus
bugbus
sdz
  • Question Question
AS2304 and seismic loads
Replies
2
Views
9K
sdz
sdz
SteynvW
  • Locked
  • Question Question
Importance Level and Steel Construction Category
Replies
3
Views
619
SteynvW
SteynvW
TTAPP
  • Locked
  • Question Question
Test Level and Performance Level Barriers - AS5100
Replies
1
Views
442
Smoulder
Smoulder

Part and Inventory Search

Sponsor

Back
Top