Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Structural member / type --> not all types?

Status
Not open for further replies.

Donnis

Automotive
May 15, 2003
54
Hello everybody,

why I cannot see in the type list all types of profiles when I use "Structural member"? For example, if I use "Structural steel" from Toolbox I can choose in ISO/SC Beam between SC100, SC120... but in "Structural member", I select Standard = Iso but under Type is only "angle iron", "c channel",..., "sb beam", but no "sc beam" (which I really need)! Is this just a matter of settings (options)?

Thanks in advance.

Conrad

 
Replies continue below

Recommended for you

In the task pane, go to your design library->Toolbox->ANSI Inch->Structural Members. There should be a couple of zipped folders in there that contain what you want.
I believe that's where they're located. I unzipped mine some time ago and don't remember their exact location...

Jeff Mirisola, CSWP
Certified DriveWorks AE
Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor