Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Strip Lining

Status
Not open for further replies.

flames

Materials
Joined
Feb 4, 2002
Messages
21
Location
CA
We have a PWHT Div II vessel in sour service made from SA516 Gr.70 (the particular steel is microalloyed). We are planning to stripline the vessel with 316L after it has been in service for 10 years. Do we have to preheat to 200F for the striplining?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top