Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stresses at the Bolt connections

Status
Not open for further replies.
Gokulkrishna

Gokulkrishna

Mechanical
Joined
May 30, 2013
Messages
25
Location
HK
Hi,

I want to calculate the stresses generated at the Bolt connections (between the flange of the valve and the pipe) due the internal pressure of the fluid in a valve.

Is there a way by which we can avoid creating the flange of the pipeline and create a virtual wall to constrain the bolts?

Thnx!
 
Status
Not open for further replies.

Similar threads

Salvenheit01
  • Locked
  • Question Question
FEMAP: Create CFAST at multiple points
Replies
0
Views
987
Salvenheit01
Salvenheit01
A
  • Question Question
can we output Topology Optimization Element Density Distribution in the op2 itself
Replies
0
Views
2K
abhishek33
A
MihaelaN
  • Locked
  • Question Question
Threaded connections modelling with frictional contact in Patran/ Nastran
Replies
0
Views
2K
MihaelaN
MihaelaN
martin555
  • Locked
  • Question Question
Reaction Forces at RBE2 elements in NX Simcenter
Replies
2
Views
2K
martin555
martin555
Emi.Cor
  • Locked
  • Question Question
Glue and Touch contact on the same SOL 101 analysis.
Replies
3
Views
3K
Emi.Cor
Emi.Cor

Part and Inventory Search

Sponsor

Back
Top