Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

stress-strain relationship

Status
Not open for further replies.
drdr2B

drdr2B

Bioengineer
Joined
May 31, 2006
Messages
3
Location
US
I would like to use my own stress-strain relationship in equation form for my material properties. How and where can I input this?
 
Sort by date Sort by votes
See the TB command in the documentation. This gives you a variety of options to input material properties with. Read the descriptions and decide which model is best suited for your use.

Good luck,
-Brian
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

LS_SMS
  • Locked
  • Question Question
Zero Through-Thickness Bending Stress
Replies
9
Views
1K
TGS4
TGS4
W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
matparta
  • Locked
  • Question Question
Relationship between mid shell stresses and top/bottom?
Replies
1
Views
1K
SWComposites
SWComposites
shiraz883
  • Locked
  • Question Question
Nodal forces and Von-mises stress
Replies
0
Views
417
shiraz883
shiraz883
shiraz883
  • Locked
  • Question Question
Stresses increase on adding thermal boundary conditions/ thermal load
Replies
1
Views
480
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top