Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stress Stiffening in I-DEAS

Status
Not open for further replies.
VaTechEng

VaTechEng

Structural
Joined
Jul 22, 2003
Messages
1
Location
US
Does anyone know how to run a stress stiffened model in I-DEAS? Can I run it using the linear solver, or do I have to run a non-linear solution?
 
Sort by date Sort by votes
As the stress-stiffening effect is inherently nonlinear, this must be done as part of a nonlinear analysis. I don't use IDEAS as a solver, so I can't help beyond this point.
Brad
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel
F
  • Locked
  • Question Question
How to Integrating the shear stress of the cross sectional area to find the moment M?
Replies
9
Views
6K
ThomasH
ThomasH
wacee
  • Locked
  • Question Question
Hot spot stress at welds
Replies
0
Views
752
wacee
wacee
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
4
Views
4K
rb1957
rb1957
D
  • Locked
Meshing in Femap
Replies
3
Views
2K
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top