Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stress Relieve

Status
Not open for further replies.
Dobe

Dobe

Mechanical
Joined
Oct 1, 2003
Messages
51
Location
US
Can I stress relieve 50YF SAE 1392 and hold the hardness? Print is asking for Core hardness Rockwell B77 MIN. We also melonite after forming.
If so at what temp, how long?
 
Sort by date Sort by votes
You'll need to unpack that a little and maybe check the spelling, because as it is I have little idea what the question is.

"Everyone is entitled to their own opinions, but they are not entitled to their own facts."
 
Upvote 0 Downvote
the word hole should be hold!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

machining pro
  • Locked
  • Question Question
Stress relieving 316L
Replies
8
Views
1K
EdStainless
EdStainless
Henry0726
  • Locked
  • Question Question
Steel - Hardening behavior after cycles - Stress/strain Curve
Replies
5
Views
1K
IngeniousQuest
IngeniousQuest
rollingcloud
  • Locked
  • Question Question
How much hardness change can I expect from a low-level stress relief on a 17-4 SS part?
Replies
13
Views
1K
EdStainless
EdStainless
bryansonnier
  • Locked
  • Question Question
ASME A216 WCB Stress Strain Curve
Replies
1
Views
468
bobjustbob
bobjustbob
Bazinga
  • Locked
  • Question Question
External Chloride Stress Corrosion Cracking on uninsulated 316SS piping?
Replies
3
Views
632
Bazinga
Bazinga

Part and Inventory Search

Sponsor

Back
Top