Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stress contours by center stress or nodes stress?
- Thread starter Bill2001
- Start date
The nodes stress is more reliable if you also uncheck index based on center stress. This will average the node stress from the plates that touch that node.
You may want to limit the display to the plates in one plane rather than include wall and floor plates into one average. The node stress is better in particular along edges and at corners.
You may want to limit the display to the plates in one plane rather than include wall and floor plates into one average. The node stress is better in particular along edges and at corners.
- Status
Similar threads
- Locked
- Question
- Locked
- Question