Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stress Consentration due to taper locking element

Status
Not open for further replies.
GregPerry

GregPerry

Mechanical
Joined
Jan 7, 2002
Messages
44
Location
GB
Hi

Does anyone have any reference to what stress concentration factor (Kt) I can apply to a taper locking element fitted to a solid shaft? I need actual values not assumptions please if that is possible.

Thanks
Greg
 
Sort by date Sort by votes
Try Peterson's Stress Concentration Factors, 2nd Edition
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Dusty Dave
  • Locked
  • Question Question
Failure of Wind Fence due to corrosion
Replies
4
Views
1K
Tensile_test_my_spine
Tensile_test_my_spine
machining pro
  • Locked
  • Question Question
Stress relieving 316L
Replies
8
Views
1K
EdStainless
EdStainless
Henry0726
  • Locked
  • Question Question
Steel - Hardening behavior after cycles - Stress/strain Curve
Replies
5
Views
1K
IngeniousQuest
IngeniousQuest
EngTipsAccount1234
  • Locked
  • Question Question
Connecting a stainless steel plate to a carbon steel bushing to avoid galvanic corrosion
Replies
11
Views
7K
mfgenggear
mfgenggear
pipewelder1999
  • Locked
  • Question Question
Research Related to minimum distance between welds.
Replies
7
Views
4K
SJones
SJones

Part and Inventory Search

Sponsor

Back
Top