Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stress Allowables in tension

Status
Not open for further replies.
Irwin

Irwin

Mechanical
Joined
Feb 25, 1999
Messages
148
Location
HU
What is the meaning of Stress Allowables in tension in the material definition? Is it used in any simulation?

Irwin
 
Sort by date Sort by votes
it'd be used in the MS calc. if you're doing some active design then it'd be relevent.

as for what number it is, well, it's either ultimate tension, yield, or some fatigue limit.

Quando Omni Flunkus Moritati
 
Upvote 0 Downvote
Thank you. I have supposed the same.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question Question
Using glued to avoid stress concentration with plate elements
Replies
3
Views
4K
rb1957
rb1957
HA649
  • Question Question
Solid Element Rotations in FEA
Replies
1
Views
359
rb1957
rb1957
ThomasH
  • Question Question
Can I copy text in Femap?
Replies
5
Views
7K
ThomasH
ThomasH
D
  • Locked
  • Question Question
GAP UNION IN FEMAP
Replies
2
Views
3K
rb1957
rb1957
nl12345
  • Locked
  • Question Question
Using CBUSH Elements in GAP Element Connections
Replies
7
Views
3K
BlasMolero
BlasMolero

Part and Inventory Search

Sponsor

Back
Top