Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Strenght material problem
- Thread starter Kaszluga
- Start date
MichaelDexter
Mechanical
Hello. Aren't both foundations of this framework sometimes solidified? Then there is a statically indeterminate system. You can learn more in the mechanics manual
- Thread starter
- #3
Yes, the ends of the rods are fixed. In my opinion, this is a three-time statically indeterminate system. According to my lecturer - one-time statically indeterminate
HTURKAK
Structural
- Jul 22, 2017
- 3,352
Assuming both supports fixed, and the frame is 2D , there are 3 support reactions at each support . If the system is not symmetric , total unknowns will be 6 and you have 3 equilibrium equations , so the system will be indeterminate of 3
degree.
If the members identical and symmetry is satisfied , the reactions will be symmetric and degree of indeterminacy would be 1.
You may look structural analysis books.
Similar threads
