Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stormwater Injection Well Modeling

Status
Not open for further replies.

ksmcclung

Civil/Environmental
Joined
Apr 27, 2011
Messages
2
I need help with how to model a stormwater injection well in Hydraflow-Hydrographs. I have a proposed detention pond which will have 3 riser structures, each over a 6" diameter injection well. Not sure how to model the outflows to similate the 3- 6" diameter injection wells. I will also have orifices in the risers to detain the first flush requirements.

Thanks,

Kristen
 
Hydraflow couldn't do that back in the 90s. Not sure if it can now or not.

Hydrology, Drainage Analysis, Flood Studies, and Complex Stormwater Litigation for Atlanta and the South East -
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top