Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

STL file

Status
Not open for further replies.
jaddanki

jaddanki

Automotive
Joined
Oct 27, 2003
Messages
10
Location
US
Can CATIA V4 read STL file. If so would you guys tell me how. Also same with CATIA V5.

Thanks in advance...

Jay Addanki
 
Sort by date Sort by votes
With Catia V4 you need to purchase the STL module($$$$)in order to import an STL file. I am not sure if the same is true for V5.
 
Upvote 0 Downvote
Hi,

You can also open a STL file in v5. Go to File menu, select Open file and insted of all files choose stl file.

Regards
Fernando
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Frame/Titleblock Macro - call image file in same parent folder
Replies
6
Views
2K
Little Cthulhu
Little Cthulhu
wchasemason
  • Locked
  • Question Question
Automating the exporting of mesh data from an Analysis file using VBA
Replies
1
Views
526
Little Cthulhu
Little Cthulhu
Nagaraj Metri
  • Locked
  • Question Question
CATIA V5 MACRO: Insert a table from existing CATDrawing file
Replies
2
Views
519
Nagaraj Metri
Nagaraj Metri
S
  • Question Question
How to export to .stp files in code?
Replies
2
Views
12K
slow_rabbit_1999
S
N
Problem when importing STEP file into CATIA - Assembly combined into one PART & PARTBODY
Replies
1
Views
3K
MrCATIA
M

Part and Inventory Search

Sponsor

Back
Top