Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sticking Contact Problem Abaqus

Status
Not open for further replies.
Tsaqif

Tsaqif

Mechanical
Joined
Oct 25, 2023
Messages
1
Location
ID
Dear all
I am on simulate gear contact on abaqus (there are 3 gear), but after few second the gear 3 is sticking (picture on attachment) and make the simulation aborted, so the gear 3 is slipping to sticking. Does anyone knows how to prevent sticking contact in abaqus?
Thanks
 
 https://files.engineering.com/getfile.aspx?folder=d258f205-7930-4694-b9b0-a3b9d3eb3cbd&file=gear.JPG
Sort by date Sort by votes
Do you mean the CSTATUS result ? Are you modeling the gears as rotating discs with no teeth ? What is the contact definition ?
 
Upvote 0 Downvote
You can prevent sticking if you set friction=0
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

G
  • Locked
  • Question Question
Abaqus explicit - general contact problem
Replies
5
Views
16K
FEA way
FEA way
vikram manoj
  • Question Question
Abaqus-Isight
Replies
5
Views
16K
snow83
S
A
Abaqus help
Replies
2
Views
8K
ArijitME
A
I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
I
  • Locked
  • Question Question
Abaqus subroutine
Replies
3
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top