STEP export problem

[jhyder]

I have just installed Pro/E on my new HP workstation and I think I may have missed an option or something during install. I had to setup this new workstation myself and installed Pro/E from the company file server which went without a problem. The problem started when I was asked by my supervisor to export a couple of files to STEP format. It was at this point that I realized that I do not have a STEP export option when I go to "File->Save a copy". Everyone else in my office has the same copy of the Pro/E installed with the same config.pro file and they all have the STEP export option. Am I missing something? I would really appreciate any help.

 

[looslib]

Reinstall Pro/E and be sure to select the translators option.


"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[jhyder]

Hate to say, but I have already tried that and it didn't solve my problem.

 

[CADALL]

Hello, I am having a similar problem and hope someone can assist me too. Help, I see no STEP export option in Save As with Wildfire 1.0

http://www.illustrativedesigns.com

Product Designer of Contract

 

[hd79]

I had this problem a while ago and was told by our IT dept that not all of our Pro/e licenses carry the same functionality and exporting as a STEP file was one of them. I had to keep logging into Pro/e hoping to grab a license that would allow me to create a STEP file. It was a crap shoot but eventually worked.