Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Step Catia

Status
Not open for further replies.

SolidEdgeV20

Marine/Ocean
Joined
Dec 6, 2007
Messages
13
Location
FR
I worked in Catia R16 and now i work with solidEdge V20. But I have got few problems when I want to open a STEP. I save a CATIA's file in step to open it in solidedge but when I open it in solid there is not all items. So I would like to know how I can do ?
Thanks you.
 
It all depends on what you wee trying to convert.
It may be that the model has come through as surfaces that will not stitch to form a solid.

If the Catia file was a single solid, open the step file as a Solid Edge Part.
There may be a log file created when you did the import into Solid Edge.
Have a look at that and see if it gives any clues.

bc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top