Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stelliting inside the cages - globe control valves

Status
Not open for further replies.
Mechsal

Mechsal

Mechanical
Joined
Sep 1, 2019
Messages
2
Location
IR
In severe services I know that seat and plug are stellited, but can inside the cages be stellited too??
 
Sort by date Sort by votes
It is not required... but Sometimes due to the customer requirement, this cannot be avoided.
instead of stelliting hard chrome coating is enough if you can convince the customer with technical clarification.

Dinu...

There are no secrets to success. It is the result of preparation, hard work, and learning from failure.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Fat Tony
  • Question Question
Max allowable pressure drop for control triple eccentric butterfly valves
Replies
5
Views
5K
Fat Tony
Fat Tony
p6g2p6
  • Question Question
Low cost butterfly valves without the rubber lining
Replies
3
Views
4K
Danlap
Danlap
Magnar
  • Question Question
What is the drifference when recertification between PRV/PSV on HC and Steam valves
Replies
1
Views
408
The Obturator
The Obturator
neroverdi41
  • Locked
  • Question Question
Pressure Control Valve vs Flow Control Valve
Replies
11
Views
6K
Taicho567
Taicho567
neroverdi41
  • Question Question
Control Valve CFD Analysis
Replies
11
Views
9K
neroverdi41
neroverdi41

Part and Inventory Search

Sponsor

Back
Top