Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stellite overlay 1

Status
Not open for further replies.
baski67

baski67

Mechanical
Joined
May 22, 2002
Messages
12
Location
IN
Can anyone throw light on useful tips for doing stellite deposition, min 1.6mm after machining on internal taper portion of the valve body
 
Status
Not open for further replies.

Similar threads

WE17
  • Locked
  • Question Question
Weld Bead/Overlay AWS D1.1 ?
Replies
0
Views
278
WE17
WE17
Rajeev7
  • Locked
  • Question Question
Overlay testing requirements.
Replies
1
Views
158
qcrobert
qcrobert
WeldGk
  • Locked
  • Question Question
Stellite 6 to Duplex welds
Replies
2
Views
230
weldtek
weldtek
BlackwellS
  • Locked
  • Question Question
317L to 5Cr Dissimilar Weld with overlay
Replies
2
Views
153
BlackwellS
BlackwellS
carmoret
  • Locked
  • Question Question
WPS/PQR with ASTM A487 4C with 316 overlay
Replies
2
Views
267
GRoberts
GRoberts

Part and Inventory Search

Sponsor

Back
Top