Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stellite 6 to Duplex welds

Status
Not open for further replies.
WeldGk

WeldGk

Materials
Joined
Aug 14, 2007
Messages
42
Location
CA
Can Stellite 6 be successfully welded to 2205 Duplex?
 
Sort by date Sort by votes
Stellite 6 can probably be successfully applied to duplex stainless. In the past I've developed procedures for Stellite 6 on P8, but, I don't have first hand experience on P10H. For specific information I'd suggest you contact the folks at Deloro Stellite. .com
 
Upvote 0 Downvote
KimberleyS,
Perhaps I should have qualified that you were not talking about a strength weld between duplex and St6. As you probably know, that wouldn't be a good idea.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

EngDM
  • Locked
  • Question Question
Minimum effective fillet length for stud welds
Replies
0
Views
929
EngDM
EngDM
nabeel3
  • Locked
  • Question Question
TKY Welds
Replies
1
Views
435
gtaw
gtaw
JT0202
  • Question Question
AWS D1.1 2020 Group I to Group II Material PQR
Replies
0
Views
2K
JT0202
JT0202
naquib
  • Locked
  • Question Question
WPS Qualification AWS D1.1 2020, Box to Box WPS Sample
Replies
0
Views
2K
naquib
naquib
George VB
  • Locked
  • Question Question
Requirements for Subsize Impact Specimens in PQR as per API 650
Replies
1
Views
1K
akpipelineengr
akpipelineengr

Part and Inventory Search

Sponsor

Back
Top