Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stellite 6 on Stellite 6 galling?

Status
Not open for further replies.
Airo13

Airo13

Petroleum
Joined
Apr 12, 2016
Messages
2
Location
NO
Is anybody have experience with galling issues in ball valves with ball and seats being hardfaced with Stellite 6?
In my case the valve is 8" CL300, op. temp -9/+65 Deg C. op. pressure limit is 48 Barg.
 
Status
Not open for further replies.

Similar threads

Ratheesh_n
  • Locked
  • Question Question
Stellite 6 over Alloy 625 weld overlay
Replies
1
Views
1K
SPDL310
SPDL310
Material Engineer 98
  • Locked
  • Question Question
Stellite-6 requirement on Solid Inconel 825 Trim material
Replies
1
Views
618
Danlap
Danlap
I
  • Question Question
Classification of Swing Check Valve Opening Type per API 6D Clause 4.4
Replies
5
Views
16K
ilkerdburhan
I
Bazinga
  • Question Question
API 6D - Specified Level for Hydrogen (SLH)
Replies
2
Views
4K
Bazinga
Bazinga
S
  • Locked
  • Question Question
API 6A standard 10000psi ball valve material selection
Replies
4
Views
2K
Sean_Wei
S

Part and Inventory Search

Sponsor

Back
Top