MIKEY101DOH
Mechanical
Does anyone know of a fabrication 'norm' for steelwork fabrication estimating. I use JS Page Pipe manhours for my pipe fabrications but cannot find anything similar for steel fabs
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
steel fabrication estimate 1
- Thread starter MIKEY101DOH
- Start date
- Status
-
1
- #4
I always used $2.00/pound for skid type structures. This is welded out, ready for paint. However with recent price increases for material and wages, I have upped it to $2.25 pound. Of course this is we do it ourselves, so if you have an outside fabricator do it, it will be alot more.
$20/sq ft right now for deck plate, about the same for grating.
Zuccus
$20/sq ft right now for deck plate, about the same for grating.
Zuccus
- Status
Similar threads
- Question
- Locked
- Question
