Steady flow input fundamental question 1

[cacique101]

When inputting steady flow data, does HEC RAS not accumulate the flow downstream from station to station.

ex1 could be considered as the representation of the inflow specific to teach station

ex1
Station 500 flow 100 CFS
Station 300 flow 50 CFS
Station 100 flow 200 CFS

Schematic attempt______________________________________________
Station 500 | <- 100 CFS
|
Station 300 | <- 50 CFS
|
Station 100 | <- 200 CFS

Do I have to manually input as
ex 2
Station 500 flow 100 CFS
Station 300 flow 150 CFS
Station 100 flow 350 CFS
?



Which is the correct format to input the steady flow data?

Input much appreciated.

Regards

 

[gopher669]

It does NOT accumulate. Enter it like your Example 2.