Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Statutory Requirement - Testing

Thread starter gjb1
Start date Nov 10, 2002

Status: Not open for further replies.

Nov 10, 2002

gjb1

Mechanical

Could anyone tell me if there is a statutiory requirement for the calibration of electrical equipment ie load cells. The reason I ask is that mechanial lifting equipment has a statutory requirement to be inspected annually. If a load cell is incorporated into lifting equipment does what governs the testing/calibration.

Thanks in advance.

gjb